#Videostream url for ip cam pro software#

They sometimes use the Hikvision APIsĮxample URL: rtsp://192.168.1.210/h264.sdp You may have to contact support for your specific model.

#Videostream url for ip cam pro software#

Note: Swann uses various lines of hardware and software and RTSP streams. Swann camera RTSP where 0 = mainstream and 1 = substream Samsung / Hanwha Techwin Camera RTSP - stream type either 1 for mainstream or 2 for substreamĮxample URL: will bring up mainstream for a camera on 192.168.1.210 c1 would be channel 1, c2 channel 2, etcĮxample URL: will bring up substream for channel 2.Įxample URL rtsp://192.168.1.210/axis-media/media.ampĪvigilon RTSP RTSP streams must be generated in the web UI of the camera under compression and image rate. You can also encode credentials into the URL by entering it prior to the IP address - for example.Įxample URL: will bring up mainstream for channel 1, where admin is the username and 12345 is the password.

This RTSP stream would mainstream channel 1 on an NVR at 192.168.1.210. 201 would produce the channel #2 of the NVR and mainstream and 202 would produce channel #2 and substream.Įxample: rtsp://192.168.1.210:554/Streaming/Channels/101 Changing the to 102 would create channel 1 and stream #2. streaming channel - for example “101” would be channel 1 and stream #1 (mainstream). The of main stream is 0, extra stream 1 is 1, extra stream 2 is 2.Įxample URL: will bring up substream for channel 1 Some Common RTSP URLS: Dahua RTSP stream (Cameras & - the IP address of the IP Camera. This will indicate if the camera is having a bandwidth issue and is dropping packets. When we are testing for packet loss you will select 'Tools' and then 'Codec Information'. If all is successful it will display the RTSP stream. Enter the Camera specific RTSP stream.Īfter entering in the URL and pressing Play you should be prompted to put in the cameras Username and Password. You must test it with VLC because the way the software pulls the stream in is through RTSP on port 554.ģ. Navigating to the cameras web interface does not mean that the camera will work. If a camera cannot connect using VLC it will give us a better idea of what is going on with the camera. This is to test the RTSP stream and make sure it is connecting. You will have to test the camera using VLC media player. The local IP address of the device is: 105.152.15.99 and the RTSP port is 554.You may run into issues with a camera connecting or after setting up a camera you may see a red X. The local IP address of the device is: 192.168.1.100 and the RTSP port is 554. These are the RTSP streaming addresses:ĮZView Main Stream: Sub Stream: IPC Main Stream: IPC Sub Stream: Example 2. – 0 for main stream (highest resolution), 1 for substream (low resolution, but faster).– This refers to the channel number that you want to pull.– This is the RTSP port of your device, the default is normally 554.– This can be the IP address or the domain / DDNS name of your device.– This is the username to access your device (IP camera, NVR, DVR).Uniview RTSP URL formatįor NVR: rtsp:// : : /unicast/c /s/liveįor IP camera (IPC): rtsp:// : : /media/video Basically, it’s designed to send audio or video live from one device to another. RTSP stands for Real Time Streaming Protocol, a network protocol for streaming the videos in real-time. If you own a Uniview device such as an IP camera or a NVR/DVR, you can use the RTSP protocol to live stream.